GE Profile JT910SASS Electric Single Oven "reseting clock range" Questions

...range. Attempt setting the clock, if it is ineffective then I would suggest contacting a professional to move forward accurately. The range may possibly have a faulty wiring or a communication issue ...

...range. It has two attached ovens, a large one and a narrower one. Recently, our neighborhood had a power outage. When the electricity came back on both ovens have "err" message. Stovetop ...

...range i replaced the digital clock panel that controls the clock and oven.after i replace with the new one,i could set the clock and put oven on pre-heat.it seemed like it was fixed.but then it ...

...range works fine, but digital clock and digital display stopped working which works oven, so oven also will not work f11 code Frigidaire oven won't work. top range works fine, but digital ...

...range, no operating instructions for the digital clock/timer/oven controls. How do I find exactly what style of range it is, and how do I reset the timer once it has been started? I found the ...

...Range Control/Clock (ERC) OR.... F2 Oven temperature sensor shorted Replace oven temperature sensor OR F2 Temperature runaway detected (Bake/Broil: 600 - 700 F; Clean: 930 - 1000 degrees F). Sounds ...

range.None of the buttons respond. Rene Try unplugging it to reset the main control board witch most of the time its your clock.then push enter.if don't don't work then your clock (main control is bad

...range cooker when I bought the house so have no manual. We had a power cut this morning and when the power was restored the analogue clock was continually flashing. I tried to reset it by pressing a ...

...range. It was to hold down the clock button for an extended time ~15 sec. It worked for our kenmore and hopefully for yours too. I held the clock button down for 15-sec, and it reset itself. It works ...

...clock and burners of your Frigidaire range are working but your oven does not bake or broil. May I have your model number please? You can normally locate the serial tag (which provides your model ...