GE Profile JTP18 Electric Single Oven "lights keep" Questions

once we light the pilot light it keeps turning off how do we keep it on makeed sure that the pilot flame is properly direct on the thermocouple if thats ok then replace the thermocouple

...keep the fuse to the ovens off because the lights going on and off, whether the oven is in use or not, drives me crazy. Same exact problem - oven light keeps turning itself on and off intermittently. ...

After a power outage, the oven control light keeps flashing. I have turned off the 220 breakers, but when I turn them back on, the light keeps flashing. You have too reset clock pressing two buttons ...

Electrolux E36DF76EPS Why does the lock light keep flashing ( note oven works normally ) Hello, We have an Electrolux E36DF76EPS, the lock light keeps flashing - the oven and burners work fine, but I ...

...lights on my extractor fan keep blowing! Thanks in Anticipation no connection between lights on fan. problem is that bulbs these days are poor quality (but cheap) it is common for these circular ...

hotpoint self cleaning oven clean light won't stop blinking I used the self clean option for the first time, and I stopped it halfway through the cycle then when i went to use the oven to cook pizza ...

replaced the top element but the circuit breaker keeps tripping when the oven or grill is switched on however the light and the defrost settings work normally whirlpool akp 246/ix oven & grill. When ...

Can't keep the pilot light lit. Just changed pilot light and knob. Having a hard time keeping pilot lit. Usually takes 30-40 minutes (if succesfull) to light it. Your safety valve is bad. You could ...

ge monogram single convection wall oven Tried cleaning and when the cleaning cycle was over the locked light keeps flashing. The door is open but the oven will not turn on. The locked light just keeps

lock light on frigdaire self cleaning oven I turned on self clean on my oven and it ran for over an hour so i stopped it but then the oven door remained locked so i disconnected the power to it for ...