GE JGRP17 Gas Single Oven "probe working stove" Questions

Ad

Question about Frigidaire Ovens

1 Answer

...Stove top works, but nothing else. F30 Error. Thanks in advance for any help. The fault code shows that your temperature probe opened. 1. Check resistance at room temperature & compare to RTD Sensor ...

Ad

...stove top and all the LEDs work, but neither the bake element or the broiler heat up at all. I took the back panel off, and see the same burn marks near the temperature probe as described above. ...

Ad

...stove top does. keeps beeping on F1 or F3 your oven temp probe may be bad. you can verify by measuring the ohms across it should be less than 3000 ohms if it is over 3000 ohms the probe is probably ...

Question about Maytag Ovens

1 Answer

...stove, it's not the control board because the rest of your stove work. if it's just the oven, it most likely the thermostat, blower or the heat probe. go to www.reliableparts.com to get parts for

Question about Frigidaire Ovens

1 Answer

...Stove was reprogrammed including setting the clock but when the oven temperature was set, the oven turns off when the door is opened. Power outage could have shorted out the control panel. Call the ...

...working okay, but broiler lights up as soon as oven is switched on and will not turn off with control panel. No error messages are set. Hi.If the element does not turn off, possible  faults ...

Question about Ovens

1 Answer

...not remain set. The burners work, but oven will not heat up when I set the temperature control hi there, can you supply me the brand and model # off your stove please? it may just be the heat

Question about GE Ovens

1 Answer

...double check the connection in the back of the stove where the probe is connected. you can try bypassing the connector and making a direct connection. if that doesnt work, your control board is no ...

...there is a "safety T-stat" disconnect from the circuit by removing one wire and read for continuity. If none is detected, replace t-stat and voila... stove works. Much cheaper than erc and

on.stove top burners still work. unit is about 7 years old Check the door switch and the temperature probe. If they are ok, then the problem is likely in the control board. These boards can be rebuilt

Not finding what you are looking for?
GE JGRP17 Gas Single Oven Logo

180 questions posted

Ask a Question

Usually answered in minutes!

Top GE Ovens Experts

Cindy Wells

Level 3 Expert

6688 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Paul Bade

Level 3 Expert

1818 Answers

Are you a GE Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...