GE Profile JT912 Electric Single Oven "door close" Questions

...Close the door against it carefully and push the door closed. Do it a little at a time and remove the spacers and try the door each time until you are happy that it closes nicely again. It should be ...

door to close tightly same problem, I tried to adjust the level and tip the oven back, but that didn't work either. Two options exist, change the hinges, or close the door with a hammer handle between

oven door not closing properly . Ilve built in 900mm oven. Door does not seem to stay properly closed now, letting heat out. Seems like hinged door is loose and only stays tightly closed if I push on ...

...door will not close because the door lock is on and flashing, also the oven light won't go off. how do I fix the door lock flashing so I can close the oven door completly? black flat top frigidaire ...

...door came open and now it wont close or lock all the way. It will stand up and the door should be closed instead it is open and you cant close and lock it. Any help? When the door came open you may ...

...door does not fully close The usual reason for oven doors not closing properly, is weak door hinges,if it does not close all the way, and the door seal is o/k, then I suggest you replace both door ...

...door close a bit better than it had been closing. I Had read on another site about putting a hammer handle down near to the hinges and then closing the door gently until pressure comes to bear on the ...

close door error When both the microwave and oven door are closed the control panel says close door on the ove and door on the microwave when they are closed! Thus, they will not function unless I get

...Close Door Light intermittently On when my door latch is working perfectly fine? Prior threads about the Door Close message have not addressed this specific issue on my KitchenAid Superba under the ...

door will not close completly When you say "oven door will not close properly", do you mean that it closes but not tightly against the rubber seal on the oven cavity? Or is it some other closing ...