fan blade is breaking off, replace the fan I have glued blade pieces back on, but don't use super glue if this is a heater.
...to your condensate drain and check for moisture. If you find none, you will need to replace the inducer fan assembly. Check screws holding motor to housing and lint on blades making out of balance, ...
Question about Dayton Heating & Cooling
fan blade for a dayton wall heater model 2E441.Where can I get one? You should be able to google the manufacture and look for a contact us area where you can get a hold of them and order it unless the
fan for warped blades. if the blades are warped or mis-aligned, replace it. This fan also is protected by a shroud as well, and it will make noise if the fan blade is damaged. Last, i would move on to
Heat pump fan Fan shaking and sounds like a helicopter when it comes on. Replace fan blade, capacitor and motor.
Ser # 101799 heater. I am looking for a replacement fan blade. As near as I can measure, it is 7.75", CW 5 blade, 5/16" bore. Any thoughts on where I can get it? Try WW GRAINGER.com they carry datyon
...replacement motor and wire nuts. Slide the housing out, turning it on the side that exposes the motor. Remove the 3 mounting screws holding the motor to the housing. Loosen the lock nut holding the ...
fan blades broke off. Can I glue it back on, (and use what kind of glue) or do I need to buy another fan or do I need to buy a new heater? Where can a person buy another fan to replace the broken one.
...Try moving the fan blades with the unit unplugged. If they don't move easily or are ceased the fan may need replacing or lubricating. The heat in these units dries out the fan bearings over
23 questions posted
Usually answered in minutes!
26 Questions
40 Questions
24 Questions
1 Questions
2 Questions