New kerosene heater will not ignite Fan comes on will not ignite my Dads heater is doing the same thing i took it apart and found the fan has a device in it that builds pressure and forces it into the
...new as sputtering Pump appears good fuel spurting upon startup Went to buy-have 5 different kinds of same nozzle listed.(online) Solid- hollow -semi-hollow -and universal Not sure which to buy and ...
...fan just runs but no flame I cleaned all hoeses and filters plug now iam stumped Well usually when this occurs it is a sign that the nozzle is plugged or just plain wore out. So I want you to try ...
...ingnite there is also a new ingnitor that has been installed . you turn on it glows fan starts and starts pumping fuel but wont ignite Did you set the pump pressure to specs. If not, it won't
...new fuel and cleaned the filter and the spray tip. the fan will come on and the fuel will fire but it will only stay on for a few seconds and then go out and puff smoke. Try cleaning the photo eye ...
...new. Fuel is fresh and fuel pressure is 3 psi. Spark is very strong (Blue) in fact. What am I missing?? Your problem is most likely the lack of pressure from the air pump. Your pressure is extremely ...
fan kicks in, fine mist sprays our of nozzle, then the glow plug goes out and it shuts off. Also has new Kerosene. What can i do to get it to run. It shound like it could be a defective safety control
...fan blows for apx 5 sec but will not light. I did just put a new inginter on it any ideas? This is normal operation for this heater IF it does Not light. This has a photo 'eye' that looks for the ...
23 questions posted
Usually answered in minutes!
63 Questions
29 Questions
25 Questions
19 Questions
12 Questions
