Mr. Heater MH75KT "kerosene wick replaced flames" Questions

...wick on a dyno glo kerosene heater how do you adjust the wick There is a big knob on the front. Clockwise is more flame, counter clockwise is less flame. If the wick is too short to stay lit, replace ...

...kerosene heater has excessive smoke and yellow flame I did the decarbon procedure but it still does it. Do I need to replace the wick? I'm wondering the same Should a duraheat, etc., cylindrical ...

...wick and start with fresh K-1 Kerosene. If you are sure of your kerosene and your heater is giving off sooty black smoke it is a sign that the fuel/air mix is off. Make sure your heater is not in a ...

...wick. try buying your kerosene at a different location. I have the same heater and have experienced the same problem only to find that the kerosene I was buying was contaminated with water.I have ...

i have a dyna-glo rmc-95-c2 kerosene heater, i replaced the wick and i can not get a full flame when you replace the wick did you set the control all the way down

kerosene, K-1 recommended. The orange window lets you know the fill level when it's upside down, and when the fuel level's getting low when it's right side up. After filling, let it sit for a while to

I just replaced wick on my kw24f kerosene heater but the flame goes out after about 5 minutes did you let the wick soak for at least 60 minutes before lighting?

...wick You have to disassemble both the guard and the top shell of the unit.  Then all you need to do is remove what's left of the old element and then put in the new one.  The wicking ...

...the wick tucked it in the wick assembly so i am wondering if it just not getting enough kerosene **** in it. The person who installed the wick did it improperly. The tails should be down in the

wick are not hanging all the way down into the tank. And, therefore they are drying out. Thus, your flame gets low and eventually goes out. The only way to know is take the heater apart. If you're not