Question about KitchenAid Microwave Ovens
...can I obtain a service manual for KitchenAid microwave KHMS1850S,need wiring diagram to interlock switches. Have replaced interlocking door switches because light was not turning off after closing ...
Microwave Door Switch Problem? I have a GE Spacemaker XL microwave, model #J VM13398W002. When the microwave door is closed, the unit will not start cooking (all display lights and timer are operating
...oven , Open the microwave cover , Close and open door few times to check the door latch(es) and switch(es). Door switch assembly may has one or more micro switches.( Most switches are black or ...
Question about Kenmore Microwave Ovens
From top to bottom, what should be the types of door interlock switches on a Kenmore microwave 790.803. Pretty sure that I have a bad door interlock switch (or two?). Got the replacement part from ...
...was touchy on our fmv156dca microwave nad you had to wiggle it to work. I replaced the monitor switch and it did not fix it. I switched the top and bottom relay switches and must have a wire ...
...ukm784 displays door and wont *** on intermittent This is usually caused by either a bad door switch, a loose door switch mount, or a problem on the control panel. Even though a door switch ...
Microwave will not start up. Turntable does not work. This is usually caused by either a bad door switch, a loose door switch mount, or a problem on the control panel. Even though a door switch clicks
Question about Whirlpool Microwave Ovens
My Whirlpool over the range microwave stopped heating foods and the 2 door switches are acting totally opposite. My Whirlpool over the range microwave stopped heating foods. All else seems fine with ...
...to avoid other issues considering the age of the micorwave? The microwave has a safety door switches (2-3 micro switches) The door mechanism should hit these micro switches. If you can open ...
F6 - What does this mean? F6 appears to be a relay failure on the main board, but it may be a door switch or door switch mount. This is usually caused by either a bad door switch, a loose door switch
773 questions posted
Usually answered in minutes!
3,405 Questions
285 Questions
308 Questions
257 Questions
258 Questions