GE Advantium 120 Convection/Microwave Oven "mounting plates" Questions

...mounting plate? Without seeing plates it is hard call. personally I would remove old plate and install new plate in accordance with instructions. You want to not void warranty by using old plate. ...

I'm looking for back mounting plate to mount a Dometic Model DOTRC17B microwave above my stove. I am also looking for operating manual, manufacture date is March 2006 Check this site for the manual. ...

Can I reuse mounting plate for new microwave? I have a GE Spacemaker (JVM1650) microwave oven, that just died. I'd like to get a new one, but am dreading the installation, as my husband found the ...

...being mounted under a cabinet The upper cabinet is recessed about 1". Thanks, Michele You put a mounting plate on the wall behind where the unit will be mounted. Then the microwave hooks onto the ...

...model" Tappan Over the Range Microwave Oven from Lowes. Did NOT come with the metal "MOUNTING PLATE". Where can I get a MOUNTING PLATE? I bought a display model from lowes tappan ...

...cupboard, could be under false floor of same. The lower underside will possibly be secured to mounting plate at back. Be sure to remove these screws otherwise you may bend your mounting

mounting plate for whirlpool microwave MFG 2005 MH1140MQ2 To get the mounting plate you need to contact whirlpool at the link below. http://www.whirlpool.com/custserv/email_form.jsp Good luck and ...

the manual says 17.5 inches but the template says 17 inches for mounting plate which is it Measure the holes in the mounting plate and you'll know.

...the range microwave oven Model MH6600X-0 June 1990 Jim here. In cabinet above microwave, locate 2 mounting bolts. Place a box on the stove top to support the microwave once the mounting bolts are ...

Hi there, I'm installing an LG LMV205SW OTR Microwave and the four holes for the mounting plate do not coincide with the two wall studs that are behind the microwave location. Can I sink a couple of ...