...enamel paint will do,, but it will work fine as it is,, it realy dont need any paint on it,, its only there to make it look nice,,however if you do paint it you must let it dry out fully before you ...
...enamel paint, such as that used to paint "model" toys works just as well. In either case: Smooth the old stuff off, sand lightly (you want no metal dust left -or- damaging any coating on the metal) ...
...enamel paint (spray-on on brush-on), I've found it works fine on a small area if the area is not subject to high temperatures. First you need to lightly sand away any rust or debris. Then be sure the ...
...enamel/paint in the interior of the microwave, by the base & back wall seem has peeled off - about 2 inches. I see unpainted metal & I am concerned. How do you fix this problem and is it bad ...
...enamel in one corner has come off and I am wondering if it is save to use, or am I getting radation from it Microwave ovens do not produce ionizing radiation. The only risk from leakage is burns. If ...
...enamel paint. (no lead paint!) Just make sure to only sand the area your painting as any sanding scuffs not painted will hasten a repeat performance of the sparking routine. The RF will bounce off ...
Question about Frigidaire Microwave Ovens
...enamel white paint. Repairing the loose hinge is simple. First buy a pop rivet tool and 1/8'' or 3mm rivets. Second remove the door. There is a little plastic pop tab on the inside ...
Are these repairable? Yes they can be cleaned. prepared and painted with enamel paint. The reason the paint comes off is usually due to condensation as the oven is left with the door closed after use
...the works. Not sure what the plate is you speak of, Generally all metal objects are painted with enamel to prevent sparks. The humming is a worry though as it indicates something not functioning ...
26 questions posted
Usually answered in minutes!
3,405 Questions
567 Questions
285 Questions
308 Questions
257 Questions
