GE JVM1660 Microwave Oven "sensor working stopped" Questions

Ad

Question about Hotpoint Microwave Ovens

1 Answer

...working and had error F3 on the screen. We unplugged and waited then it worked for about 1/2 hour and stopped with the same message. What's wrong Sorry to read about your problem, I hope this helps ...

Ad

...working no power at all was wondering if a fuze blew?? They do have a fuse. They also have thermal cutoffs and possibly a thermal flame sensor fuse. the main fuse would be near the control panel the ...

Ad

Question about Panasonic Microwave Ovens

1 Answer

...working then stopped again this afternoon? It is a panasonice 1300w microwave. The outlet is fine, other things work when plugged in to it? An ideas, is there a re-set button on the microwave? If the ...

How do I turn off defrost on a sensor microwave oven? No answer? Press the "Cancel" or "Stop" button on the microwave oven to stop the current defrost cycle. Look for a "Defrost" button on the control

Question about Panasonic Microwave Ovens

1 Answer

working turns itself off after 15 sec not heating is it throw it out or can it be fixed simply???? If it stops at 16 seconds and is a sensor model, it probably has a defective humidity sensor. You can

Question about GE Microwave Ovens

1 Answer

...WORKING ok here is the result to searching GE the answer to thew code. Please rate our help to keep this free service online Open oven temperature sensor (circuit) (over 2700 ohms) or, shorted oven ...

...food or water,set time 30secs or above it stops by itself If it stops at 16 seconds and is a sensor model, it probably has a defective humidity sensor. If it stops after 22 seconds, that means ...

Question about Microwave Ovens

1 Answer

...Sensor cooking ceases and displays "F3H". Fan has stopped working also. A make and model would have been nice, but try unplugging it from the wall outlet for 15 minutes. Hope that helps... ...

Question about Sanyo Microwave Ovens

1 Answer

...sensor is not working i can press rest 1234567 button n not 890 n start n stop button Normally, it suggests the keypad is faulty. The fact that you have part function indicates the board is ...

...will run for about six seconds and stops, and smells like burning wires and it shows a message "SENSOR RE-HEAT PRESS START" my panasonic will run for about six seconds and stops, and smells like ...

Not finding what you are looking for?
GE JVM1660 Microwave Oven Logo

106 questions posted

Ask a Question

Usually answered in minutes!

Top GE Microwave Ovens Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Are you a GE Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...