GE Spacemaker JVM1640SJ Microwave Oven "xl1800 control pad" Questions

...xl1800 there is what i believe to be an error code (F3) and a triple beep emitting from the microwave. what is this signify and what is the solution, thank you very much tom cook F-3 means shorted ...

XL1800 JVM1850CH01 vent fan won't turn on The vent fan won't turn on and the control touch pads for vent fan, vent fan booster and surface light don't work. Everything else works OK. The surface light

...xl1800 times out after 2-3 seconds Our ge spacemaker xl 1800 is about 2 1/2 years old. After we are asked to reset the clock (choosing clock, entering 222 then start) the clock is set. When we try to ...

XL1800, the timer runs but the microwave doesnt This is usually caused by either a bad door switch, a loose door switch mount (which are pretty simple problems to fix) or occasionally a problem on the

...XL1800 over range microwave. No lights/clock/nothing. Replaced two 250V 20A fuses located near end/start of power cord with absolutely no change. dont know what to do next. any help is welcome. A ...

XL1800 simply died and nothing works. Could there be a fuse problem and how does one check for this if so? A microwave can be dead for many reasons. It may be the fuse, which is usually located behind

xl1800 key pad not working FOLLOW the steps and fix it.God bless you Controller is confusedA power surge or random non-reproducible action of the universe may have resulted in the controller's program

...XL1800) with nothing in it and it started making a loud noise. I shut it off and after that it worked normally but would always make a loud noise when running (like it was working really hard). Now ...

XL1800 JVM1860WD002 THIS HAPPENED BEFORE SOMETIME AGO, BUT I HIT SOME BUTTONS AND IT WORKED. ALL PROGRAMS AND DISPLAYS WORK. VENT OPENS WHEN START IS PUSHED. COUNTDOWN AND RINGER WORK. UNIT & ...

...pad works ocassionally, and you cannot set the time. F3 on a GE / Hotpoint microwave means you have a shorted membrane keypad. If you (or someone you know) might want to replace it yourself, I have ...