GE Spacemaker JVM1640SJ Microwave Oven "turntable making loud" Questions

turntable is suddenly not working and makes a loud grinding noise when it tries to work. I read on the FixYa site that I need a microwave motor and it is fairly easy to fix. Where can I buy this part?

...turntable make semi-loud noise while oven is cooking, but it does not turn. We can stop noise by pressing turntable button. The turntable system consists of the motor, the coupler, the turntable ...

Turntable, timer and lights work. The diode that connects to the capacitor needs to be replaced. Once its replaced microwave will begin to heat again. (If it wasn't heating and wasn't making a humming

turntable works, all dials function [email protected] Hi Thanks for using FixYa. Microwave not heating properly is caused by a power relay going bad, cold solder joint on the board and/or magnetron

loud hum, turntable works, but food doesn't get hot at all! It sounds like the magnetron may have either failed or is not being supplied with the extremely high voltage required to run it. YOUR SAFETY

loud squeaky sound when it's running. When I stop it I can hear the spinning slowing down and the sound goes away until I restart it. I'm afraid that it may blow up. Is there anything that I can do to

MAKING LOUD HUMMING NOISE AND INSIDE REAL HOT WHEN DOOR CLOSED''WHEN DOOR OPEN DON'T HUM When door open the microwave should not work at all, if the turntable and light come on with the door open , if

turntable and lights do not work but the unit still seems to heat-albeit quickly (almost too quickly). GE service was no help and just wants to send a tech at a charge of $85. I don't think it'

...loud rubbing noise from the rotating plate. Is there something that we can use to lubricate that area so it will be more smooth? I have the same problem my microwave is a kenmore this is the second ...

...loud grinding noise when the turntable is turning. The noise stops when I turn off the turntable. Possible there is friction within the drive , the shaft or the motor. You can remove and RESET the ...