top or the bottom plate of the microwave gets too hot. Also, there may be some settings for the auto-fan that can work like this. Consult your manual. If you don't have it, you can download GE owner's
...top of the open glass above the water. Put the strips close together but not quite touching then close the door. Start the microwave & look through the glass window. Listen & Watch for sparks ...
Question about GE SpaceMaker Microwave Ovens
...started the microwave, so it was cooking (~15 min) but nothing was inside and now the microwave is pretty much dead. No display, no nothing. I turned the switch on/off at the power box, but that ...
...hot and after the last set we did, we closed the door and I went to use it later and nothing - no lights nothing - microwave is dead. It's only two years old. What do you suggest? Thanks. Chances are ...
Question about GE SpaceMaker Microwave Ovens
...top door switch (door sensing switch) is defective, or its mount is loose or broken. Even though a door switch clicks, it may still be bad inside. Door switch or mount trouble is usually caused by ...
Question about Panasonic Microwave Ovens
...top got very hot while cooking a chicken pot pie for 10 minutes. Top usually doesn't get hot. Thought it might indicate problem with fan not venting properly. Noise seems to be mostly at start of ...
...If you have extractor fans, maybe less. Don't forget the grill gets hot on top of the oven but there should be at least 10" clearence between the grill top and the microwave base, more if it is
Question about KitchenAid Microwave Ovens
...top gets too hot. NOT THAT I'M AWARE OF . YOUR UNIT SHOULD HAVE A SWITCH TO TURN ON AND MUST BE TURNED ON MANUALLY The KHHS179L fan will automatically start when heat is detected-such as multiple ...
...top does ge hot and turntable rotates? any ideas? Thank you Approximately 1 month old? Should still be under warranty. Before doing anything else, contact the store where you purchased the oven and ...
hot if the food is not getting warm at all the noise you are hearing most likely is the magnetron trying to start ,but has failed... it is located behind control panel and usually requires disassembly
4,203 questions posted
Usually answered in minutes!
257 Questions
57 Questions
46 Questions
27 Questions
23 Questions
