GE Spacemaker JVM1640SJ Microwave Oven "safe sand paint inside" Questions

...use sand paper to clean the rust then use some high temperature paint (sold in tins) eg spray paint but it must be labeled high temperature and spray 2 to 3 coats . your microwave should be safe ...

...safe to use 2 things cause sparks.... a damaged Waveguide RF window or bare metal inside the cooking area. If you note bare metal you can sand and paint it with an appliance enamel paint. (no lead ...

...paint is flaking and revealing metal. Is it safe to use? Hi, Scratches, flaking and bare spots are fairly common, but should be addressed as soon as they arise so the corrosion will not spread and ...

...paint came off. I didn't use detergent of any kind - just warm water and a paper towel. Is the microwave still safe to use? Yes, but if this is not fixed, it may flake off and get in your food, or ...

Paint worn off inside and metal showing Is the microwave safe to use? It's only 3 years old and work well, but I am concerned about the bare metal. Thanks If the cavity metal of the oven is chipped or

...safe to continue using this product. Is there a paint that can be used? You need to thoroughly clean it, then sand it smooth to removew all the loose paint. Once it's squeaky clean and dry, you can ...

...SAFE TO CONTINUE USE AND CAN I USE APPLIANCE TOUCH-UP OR SOME OTHER KIND OF PAINT TO COVER THE SPOTS? If the cavity metal of the oven is chipped or charred, it will have to be sanded smooth and clean ...

...safe? it could cause the magtron to arc...becaus the exsposed metal...you can purchase the paint for the inside color of microwave...sand around area..wipe out,,,unplug microwave first....leave door ...

...it works fine on a small area if the area is not subject to high temperatures. First you need to lightly sand away any rust or debris. Then be sure the area is clean & dry so the paint will

...safe and is there any recalls on this happening? Using the microwave with exposed metal can cause additional problems. You can remove the loose paint, lightly sand the area and reprint with microwave ...