GE Spacemaker JVM1640SJ Microwave Oven "remove top vent" Questions

top. You have to remove 2 screws that hold the upper vent cover. W/ cover off you will find a phillips head screw about the center that holds the bulb cover. Remove the cover screw & lift up &

HOW DO WE SWITCH FROM TOP VENT TO NON-VENT? remove outer case and rotate vent fan motor to vent out front of unit

...remove the vent above the door on my spacemaker microwave. I have removed the three screws on top of unit(it is not installed at this time), the vent still won't come off. Even though it is not ...

...top cabinet holding vent cover on front, then you might see fuse holder just behind vent cover, if not remove screw(s) holding touch pad on, then slide touch panel up and out. it will rest on hinge, ...

...remove the top front plastic horizontal louvered front vent by one phillips screw on each end of the vent left and right. then remove the next two phillips screws you see under where the vent screws ...

...remove this model from instalation: 1. Disconnect the vent pipe from m/w (inside the cabinet on top of m/w) 1. Unscrew 2 big screws from the top (inside the cabinet). 2. Tilt it to you a little. 3. ...

top front recirculation vent to operate and hence food odors just go back into the room. How do I get it to exhaust through the outside vent. Do I need to override something in the control panel? Your

...the top of the unit. Once that's off, you should see one phillips screw at the top of the control panel frame. Remove that screw, then lift up and out on the control panel assembly. You're

...steam. The vents are sticky like syrup was poured through them and totally disgusting. Can they be removed? Unfortunately, the m/w is over a non-replaceable stove top which is so caked on that I ...

...top of the microwave there are three screws. Remove the three screws and slowly pull down from the top to get the plastic airvent out of your way. You will notice a plastic vent with two screws. ...