GE Spacemaker JVM1640SJ Microwave Oven "reasons electrical smell" Questions

...electrical burning smell. Can't be good, but maybe someone has experienced something similar that was fixable at a reasonable cost. I have the same problem on my oven- model JVM1640WB and called an ...

...electrical insulation. In all likelihood the mangnetron has failed, or perhaps even the Power Supply. or a fault that is shutting the system down for safety reasons You need to have it serviced by a ...

...electrical" smell. Can anybody suggest a fix/repair? If it is working but not heating, then test the high voltagecapacitor,the rectifier diode.or the magnetron. If all this are fine,test the control ...

...electrical burning smell, signifying its defectiveness. Also, it may have split in two, or it may exhibit a burned crack, or possibly even a blistered spot.A shorted diode is indicated by a loud ...

...if I don't have to. Thanks sweet smell from an electrical appliance is ozone cause fir high voltage discharge ( like the sweet smelling air after a lightning strike take it in for a proper ...

...electrical smell and will not heat. in our trave trailer, hasn't been used much. has a strange smell and makes a noicse when running, no heat. Turn if off, and leave it alone, remove it, if you can ...

it stop cooking and smelled burt Sounds like the magnetron has failed. This is the component that produces the microwave that heats the food. The cost of the magnetron is about 95% of the cost of a ...

...electrical leads and test them with a volt meter. To do this you have to remove it from its mounting and take it apart. It is a fairly lengthy process however. Benjamin i have a panasonic inverter ...

my microwave want heat up it has been getting moisture all in it when it was cooking clock works turntable works light works it does not heat up it smells like it is a defect Sounds like the magnetron

...electrical smell. Since there was no heat, what was burning to cause the smoke? Test the high voltage capacitor, the rectifier diode.or the magnetron. If all this are fine, test the control board. If ...