...metal plate (that spins) in the roof of the interior of the microwave (under a round white, plastic cover), and it seems that it is the gear set or the motor driving that metal plate that is making ...
Question about GE SpaceMaker Microwave Ovens
...plate comes off, you need to get behind the black buttons. There is a circuit board behind the buttons, which they make contact with. The problem with mine was the circuit board pushed beyond two ...
...metal plate on top of the control panel. remove that plate and the fuse will be in that opening. remove the fuse and check for continuity across the fuse. Replace fuse and microwave should begin ...
...metal plate can be removed or just lowered at an angle. Using a flashlight, you will see the two bulbs that probably need replacing. Pull the wire down, and they can be easily removed and replaced. ...
...metal plate on top of the control panel. remove that plate and the fuse will be in that opening. remove the fuse and check for continuity across the fuse. Replace fuse and plug microwave back in. ...
...metal plate above the fan assembly. Remove the screws at the leading edge to lift up the plate. You don't need to remove it, just lift it up! Now you have access to the metal box over the lightbulb. ...
Question about GE SpaceMaker Microwave Ovens
...plate the flops down when you open it? The bulb seems to be wired into the microwave on my Spacemaker XL microwave. It fell out when I opened the hatch to replace. It doesn't appear to be screw in. ...
metal plate near the transformer or fan. There should also be a very helpful "mini-manual" hidden inside the unit behind the control panel. It's very helpful when troubleshooting. You can usually find
...Plate Thermostat (Item 115) ------- WB27X10713 Bi-Metal Thermostat (Item 110)-----WB27X10788 They all cost about $15.00 a piece. Some additional advice: Make sure you unplug the microwave before ...
4,203 questions posted
Usually answered in minutes!
257 Questions
57 Questions
46 Questions
27 Questions
23 Questions