...night light it flikered a couple times and everything went blank. Checked brakers in fuse box and all are working. The main fuse in the microwave has blown, this usually is caused by a defective door ...
night then plugged it back in, still nothing, not even a light....giude says nothing...Can you help??? Most likely blew internal fuse. Pull the top/side cover off and check the line fuse. It should be
...night light not working I have a Kenmore 62642200 that was purchased new in 2003. I've replaced the lights that shine over the stove in the past without a problem. However, recently even after ...
...night light not working I have a Kenmore 62642200 that was purchased new in 2003. I've replaced the lights that shine over the stove in the past without a problem. However, recently even after ...
...night light, or bulbs I replaced do not. It was a microwave manufactured in june of 2003. I would think, this microwave being newer.. I could fix this.. It is a kenmore microwave.. serial number ...
...night (day before there was a power surge) after my wife cooked a dish on high for 12 minutes. Went to neighbors house, came back and there was no panel lights, no interior lights ... nothing. Could ...
...night. Everything survived except the Kenmore MIcrowave #665.60629. There is power to the microwave now, but no lights or response. Could there be a fuse blown? If so, where would it be and how do we ...
...night, one of the bulbs burned out under the unit. I removed the small screw that holds the cover in place and there was a quick arc. Now the clock works, but that's about all. I later opened the ...
...fuse, but I doubt it. There should be a "mini-manual" (tech sheet) hidden inside the unit behind the control panel or hidden on the left side behind the grille, which is very helpful when ...
4,203 questions posted
Usually answered in minutes!
257 Questions
57 Questions
46 Questions
27 Questions
23 Questions