Question about GE SpaceMaker Microwave Ovens
...off the fan motor's shaft. The fan motor will still be running when you hit start but there is no fan on it. The fan keeps the mag cooler. The mag will heat up too much in a few minutes and then ...
...fan wont turn off unless i unplug the microwave. when i plug it back in the fan comes back on but still no power to the control panel so i have to keep it unplugged...the unit was off when this ...
fan shuts off and the panel retracts to its normal position. With the fan & microwave motor off, the hum is easier to hear. Look closely at the top panel the next time you hear the hum, and you'll
fan never shuts off. My flow chart for troubleshooting says it the HV transformer. I'm not sure that is the problem?? Any suggestions! Jim Are you sure it is the internal blower and not the VENT fan ?
...off and put it back on but the fan keep runing even after hours of being off ? even the key pad option give me only high/low not off option? There is a thermostat to turn the fan on if it senses a ...
Question about GE SpaceMaker Microwave Ovens
...fan to turn off when the microwave is turned off? Most GE over the range microwave ovens have a cavity heat thermostat. if the exhaust fan cut on due to external heat generated to oven, the fan will ...
Question about GE SpaceMaker Microwave Ovens
...fan off. when pressing help, it says press this pad. nothing happens. A low tech solution worked for me. I too was getting the "Vent Fan Off" message, and despite the fact that everything else worked ...
Question about GE SpaceMaker Microwave Ovens
...does the fan work when microwave is running and at some point the fan cuts off even with the microwave still running? if so it may be that the fan is kicking out and then microwave runs and gets
Question about GE SpaceMaker Microwave Ovens
fan off. Also it seems a temperature near room temp must be achieved before it shuts the fan motor off, it is very annoying. We had to return our Advantium because of fan noise. I configured the ovens
...fan won't turn off I recently had a spacemaker XL1400 (I think) stop working. Being an EE, I opened it up and started troubleshooting and parts replacement. I found the magnetron to have a melted ...
4,203 questions posted
Usually answered in minutes!
257 Questions
57 Questions
46 Questions
27 Questions
23 Questions