GE Spacemaker JVM1640SJ Microwave Oven "clean grease" Questions

...grease on my wall, what should I clean? I would suspect a clogged grease filter (which can be cleaned) and/or charcoal filter (which cannot be cleaned and must be replaced). You can download GE ...

...clean the air filters that are under the spacemaker icrowave oven and above the stove ? If your unit is venting to the outside, you would be using one or two grease filters, which can be cleaned, ...

...Can see flashing through plastic. 1.Needs to remove that disk and clean the grease under it. 2. With sand paper clean dark burn spots. 3. Apply touch paint on open metal spots. 4.Put everything

...grease, and was damaged by the fire. If yours is still intact and not that greasy, You can carefully remove it. Clean both it and the area inside the cavity with an alcohol based cleaner. If there is ...

...clean the grease filter, soak it and then swish it around in hot water and detergent. Don?t use ammonia or ammonia products because it will darken the metal. Light brushing can be used to remove ...

...I'm afraid of breaking it. Does anyone know what this is and how I might get the panel off for cleaning? That's the stirrer cover. It does need to removed and cleaned, and the stirrer parts

...grease, and was damaged by the fire. If yours is still intact and not that greasy, You can carefully remove it. Clean both it and the area inside the cavity with an alcohol based cleaner. If there is ...

clean upper filter, not bottom filter, does grille pop out? Yes the grill pops out. It snaps in to place. Behind there is a Carbon Filter, and cannot be washed. The internet says the should be changed

...clean out the entire inside without damaging the microwave/oven functionality or interior coating? Try simple green. It is great at eating through grease. It may take a few times but it works. It is ...

...grease, food debris, or carbon, probably on the rotating rack. Run the oven for a few seconds empty - with and without the rack - to find where it is arcing. Then clean, sand, and repaint with high ...