Question about GE Microwave Ovens
...5 seconds on convection, combination or roast cooking Check oven temperature sensor for continuity. Replace if zero or infinite ohms Note: It will take a minimum of 5 minutes of convection run time ...
5 seconds on convection, combination or roast cooking. Note: it will take a minimum of 5 minutes of convection run time before F1 or F2 code will be displayed if the thermal sensor is shorted/open. F3
Question about GE Microwave Ovens
will occur if humidity sensor is detected as being open continuously over 5 seconds.F5--Shorted humidity sensor, will occur if humidity sensor is detected as being shorted continuously over 5 seconds
Question about GE Microwave Ovens
...5 TO 10 SECONDS WHEN I TURN ON THE MICROWAVE THE DISPLAY IS FLICKERING FROM BRIGHT TO DIM. IT RUNS A VERY SHORT TIME FORM 2 TO 30 SECONDS, BUT MOST TIMES JUST AFTER A BOUT 5 SECONDS IT CUTS OFF AND I ...
...5 seconds on convection, combination or roast cooking. . It takes a minimum of 5 minutes of convection run time before this code will be displayed. More information on this error code, as well as ...
...5 seconds My microwave oven timer shuts off after about 5 seconds. The convection part of the timer and the grill part of the timer seem to be working. Anyway, if I sent the timer for anything in the ...
...occur if a shorted thermal sensor is detected continuously over 5 seconds on convection, combination or roast cooking. Check oven temperature sensor for continuity. Replace if zero or infinite
...3 long beeps. Hello : Shorted humidity sensor, will occur if humidity sensor is detected as being shorted continuously over 5 seconds you need to replace humidity sensor . good luck . please rate
...5 seconds. Replace temperature probe. part no 29 Thermostat Part Number: AP3038826 made by WHIRLPOOL The above part and all other parts of your model can be foundin the link ...
164 questions posted
Usually answered in minutes!
3,405 Questions
567 Questions
285 Questions
308 Questions
257 Questions