GE JVM1650 1000 Watts Microwave Oven "pressed start loose power" Questions

...loose parts, using lower power settings, investing in noise-canceling mats, and checking the exhaust fan. To adjust power settings, start the microwave by pressing the "Start" or "Time Cook" button, ...

...loose and will overheat and melt the fuse. You cannot just squeeze it tight again, it must be replaced. If it blows the fuse almost immediately after pressing the Start pad, that's usually a shorted ...

...start, it comes on for one second then it shows a code -F7- and stops TOUCH PANEL & MICROCOMPUTER BOARD TEST FOR WHIRLPOOL.... The microwave oven may be provided with a self diagnostic routine ...

start button is pressed. When door is opened display goes dark. When door shuts display lights all characters and then says "touch clock". Touchpad functions normally, and the fan, timer and cooklight

...start'' button is pressed, and it cycles off after exactly 5 seconds. We have unplugged it and plugged it in again; no difference in the problem. Can I do anything else myself? Can it be repaired? ...

...loose connection in the wiring between the inverter, magnetron, and/or control board, or one of those components have failed. Because of the lethal voltages used and produced with inverters, I do not ...

...start all over. The fact that after so many times it will finally work tells me that whatever bad connection you have is finally getting hot enough to expand and make a good enough connection to keep ...

...loose fuse holder, or even an intermittent fuse. You should do a continuity test the fuse while it's in the holder (with the microwave unplugged, of course) then turn the fuse by hand or take it out ...

...loose for proper function. Move other appliances to a separate outlet if possible. Replace or reset the circuit breaker or fuse if blown or tripped. Unplug the microwave and wait several seconds ...