...Spacemaker it appears the door hinges have "sagged" a little or something causing the door to stick a bit when pulling open. Can hinges be tightened, replaced, etc.? Or can the problem be something ...
...off inside door you will see 2 screws that hold handle on or if your trying to get the door hinges off unscrew bottom panel to access bottom hinge screw and vent at top to access screws for top ...
...door is fully opened and push the hinge locks into an upright position. The two hinge locks should rest on top of the two hinges that are inserted in the wall oven slots.Close the door and open it ...
Question about GE Microwave Ovens
...spacemaker microwave door from wiggling at the door hinges (not the latches)? problem lies in the door, not the microwave unit where it attaches. The metal that the door secures to is very sturdy and ...
hinge side of the door. The door will lift off the hinge pins. You may have to remove the upper grill cover (if equipped) on some models for better access. If you have questions, please let me know. I
...door comes right off the hinge pins. In some cases you may have to remove the top louver panel (right above the door). You should NOT have to unmount the oven to complete this. In fact...I would not ...
...have a hinge pin that needs to be removed, or screws holding the door in place at the hinge. If you have any questions, or require additional assistance, please let me know. I hope this helps
...door comes right off the hinge pins. In most cases you will remove the top louver panel (right above the door). Is just a matter of fitting a door ?. I hope this helps hi!!!! ok try this one!!! ...
377 questions posted
Usually answered in minutes!
3,405 Questions
567 Questions
285 Questions
257 Questions
258 Questions