GE JVM1440 Microwave Oven "wall quit working" Questions

...quit altogether. The lights & mag would occasionally flicker and it must have arced at least once. Aside from the fuse, what would be the most likely component to have failed? Also, can this ...

...quit working on wall unit with oven below. The model # is GE JKP69 Hi, Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven.... Microwave Oven Basic Troubleshooting ...

...quit working no power anywhere everything stopped working. replaced light bulbs but no power to anything. Have you checked the fuse in the plug? Also there is an internal fuse that you have to remove ...

...quit working, it popped and also blew out both lights in base of this wall-mounted unit. 2- 40w bulbs. Mic seems to be working just fine, heating things up, etc. didn't trip a breaker. replaced bulbs ...

...quit working all together. Breaker is not tripped and plug outlet is fine; check on other outlets. You probably have a failed thermistor / temperature sensor. There should be a "mini-manual" (tech ...

wont work When I plug in my whirlpool wall mounted microwave it asks to set the time. I try and by the second number it quits. Sometimes it turns on a fan and wont respond to anything but a swift pull

...wall-mounted microwave for 3 years now and never experience problems, until just a month ago, the 2-speed fan has been malfunctioning. The "high" speed does not work at all, however, the "low" speed ...

...wall mount LG LMV2073 mic oven? On my GE, if you open the door, there are screws to remove that will allow the cover to be removed. When it quit working, I had to show the guy how to remove it. He ...

Quit working totally. Checked outlet and have power. Is there a fuse in the oven itself? Reset Switch? Dead appliance, power on wall outlet. YOUR SAFETY IS PARAMOUNT! Attempt this only if you are ...

...quit working while warming something up yesterday. Outlet is good. No power to unit at all. No light working, etc. Is there a fuse that I can check to see if it needs replaced? Any suggestions would ...