GE JVM1870 Microwave Oven "removing top vent" Questions

vent on top exterior be removed for cleaning? I see screws on top. Maybe it just pops off. It would be nice to just take this off for cleaning. Thank You, Robin two screws on top will release the vent

...removing the two screws at the top of the unit and gently sliding the entire assembly to the left about an inch. This will allow the vent to be cleaned of grease, hair, etc., as well as giving some ...

...vent. Depending on the model, you either slide it to the left a little bit (1/4 inch) then pull it out, or tilt out the top of it followed by the bottom. Now you should see 1 screw that holds the top ...

...can be rotated for either back or top venting.. This can be done by removing a few screws and rotating the blower housing to the position you need and screwing it back in place.. Hope this

...removing the two screws at the top front of the oven. I could pull the active vent forward, but it did not come off. I was worried that I would break it. How do I get at the bulb to replace it? I ...

top vent fan The inside light is burnt out and needs to be changes but it seems inpossible with the top fan. I took the fan cover off and can see where the bulb is supposed to be but certainly can&

...top model? Assuming it is an OTR model, your can get to the fuse by first unplugging the microwave, then removing 2 to 4 screws over the grille vent. Remove the grille vent. Depending on the model, ...

...in any of 3 ways, thru the top, outthe back or configured to vent back into the room. In any case, you should see ductwork while removing this from the cabinet. Hope this helps you get the job

...top model? Assuming it is an OTR model, your can get to the fuse by first unplugging the microwave, then removing 2 to 4 screws over the grille vent. Remove the grille vent. Depending on the model, ...

HOW DO WE SWITCH FROM TOP VENT TO NON-VENT? remove outer case and rotate vent fan motor to vent out front of unit