...need a transformer the hum. port on the furnace goes to the 24 volt transformer. one leg of the primary side goes to the transformer and the other leg of the primary goes to the neutral on the ...
...va transformer to the wires supplying power to the indoor blower motor of furnace, connect the primary wires to heat speed of furnace motor, then connect the two low voltage wires to the ...
...a fuel or ignition problem. If the unit does ignite when its reset it could be a bad Cad eye or primary control. If it does not light off when reset,DO NOT re-rest anymore and call the Heating ...
...humidistat and solenoid valve. So you need a wire from the HUM on your control board to transformer primary side and a wire from neutral on the board to primary side of transformer. Then you need low ...
...Mount the transformer on the handi box to the furnace or inside the furnace cabinet. Wire the primary wires from the transformer to the main power coming into the furnace. Connect black to
...are working with. Yes the R anc C need to be hooked to the transformer supplied with the unit. The primary 120v side needs to be hooked into the power coming into the furnace. this can easily be
Question about Holmes Products Humidifiers
...How air tight is your home?. How may people occupy the home? Whats the temperature setting for your primary heat source?Let's assume that everything is perfect. Your humidifier holds approximately 6 ...
...be removed. Rh is power for the heating circuit (usually red), and is connected to the oil burner primary control. Rc is power for the cooling circuit (usually blue) and is connected to the fan ...
...you will find on the pc board that is inside the fan housing. In both cases, there is 120v to the primary side and zero to the secondary (24vac) side. On the new unity, it was dead right out of the ...
36 questions posted
Usually answered in minutes!
39 Questions
21 Questions
13 Questions