Question about Heating & Cooling
...is a flame sensor, turn power off pull wire of flame sensor (single wire) remove flame sensor, clean with steel wool, sand it down to remove oxide build up re install and it will work just
...flame sensor issue? Yes the flame sensor is not allowing the ignitor to start, you will need to remove the flame sensor, and clean the black carbon build up from the stem of the flame sensor, replace ...
Flame sensor light blinking on my Frigidaire furnace The flame sensor is really a flame rectification circuit. Ground to the circuit board is actually conducted through the flame to the flame sensor ...
...flame sensor still same problem make sure the flame sensor is connected good. If the terminals are dirty or corroded the board will not get the proper millivolt reading from the sensor. Also, remove ...
...flame sensor is clean near the burners, The flame sensor is a metal rod that is on the opposite side of the ignitor. To clean the flame sensor you will need some steel wool, turn off power to the ...
...flame sensor is clean near the burners, The flame sensor is a metal rod that is on the opposite side of the ignitor. To clean the flame sensor you will need some steel wool, turn off power to the ...
...flame sensor? ,Hello, Make sure the flame sensor is clean near the burners, The flame sensor is a metal rod that is on the opposite side of the ignitor. To clean the flame sensor you will need some ...
...flame sensor on my old oil furnace? Older Goodman Oil Furnace has a discontinued Ducane Oil pump on it, and I can't find the flame sensor window to clean it. It starts up fine and runs for about 45 ...
flame sensor, been watching it through panel..coil lights up, flame comes on, hence furnace runs..when it goes out, blows cool air, and no flame..could a simple cleaning with sand paper fix issue? you
...flame sensor is clean near the burners, The flame sensor is a metal rod that is on the opposite side of the ignitor. To clean the flame sensor you will need some steel wool, turn off power to the ...
97 questions posted
Usually answered in minutes!
192 Questions
46 Questions
