Furnace lights right up, but will not shut off with on-off switch or thermastat switch? checked out the thermastat switch and that works fine. Disconnect the thermostat wires from the gas valve, if ...
think its because the thermastat is not set correcttly. do you have any ideas where i can get these directions on on how to set this thing up, I cannot read what it is saying on the inside of the part
rinnai 431wt my heater is set at 72 degrees. how to set to 78 degrees. when depressing stays to 72 won't go beyond. bad thermastat
...thermastat. any ideas?? The thermostat is not the problem. The motor has a starter capacitot attached that gives the motor a burst of energy to get it going the right direction. It is not doing its ...
Thermostat does not work I bougth 2 heaters and I instaled them both one of the thermostat did not work. I would like you to send me one I went to home depot to see if they could give or exchange the ...
Question about Mr. Heater Heating & Cooling
...thermastat, gas line and the vent pipe, the fan is working, i also made sure all wiring is secure. How do i fix the error blink code. There is something else that is causing the Overload/Roll Over ...
thermastat and set it high enough to come on but it does nothing. Not a thing. The a/c works just fine. Can you help. Ok, a flashing 3 on a Goodman control board usually means that the pressure switch
52 questions posted
Usually answered in minutes!
192 Questions
46 Questions