Kenwood KM800 Major Classic Stand Mixer "not turn" Questions

...not turn. Motor runs. Beaters work. Sunbeam Mixmaster Mixer on stand - purchased in 1977. Service # 1-7A. 225 watts, 120 volts. 12 speeds. Listed Mixer 423A. -- The turntable does not turn when mixer ...

...not turn power switch turns on motor but blade will not turn motor will hum but no blade turn if bottom seal worn and material leaks into shaft. Rekove drive head and try turning shaft if nio go ...

...not turn. I had taken the mixer apart and discovered a small metal spring pin was not attached. This pin is similar looking to the metal pin in a clothes pin. I believe this pin, when attached, turns ...

...not turn the screw on the right a quarter turn, the mixer should start, if not turn back the other way (both top screws a half turn) if it machine does not start then there is a strong possibility ...

...not turn anymore I tried to adjust the screw so the blade would not hit the bowl, but it will not turn to the left any further. Does ant one know what is wrong? Turn the screw to the right. It will ...

...not. How do I open the shaft area. When I turn on the D300T its motor is running but its vertical shaft is not turning. Before it stopped turning it was running heavy, it was making weird sound and ...

...Turn Handle slips, bowl does not go back down Turned the handle like always and now the bowl does not go back down, handle turns with some noise Does the handle seem to move easier?there is a shear ...

...turn the dial back and forth, the head will move, but it moves intermittently. It will not fully rotate at any speed. I would take a swag at it and guess that the speed control has a variable ...

...then stops and hums Is the humming noise the sound of the motor straining to turn without moving (it won't last very long like that) or the sound of the motor turning but not operating the