Question about Kenwood Radio Communications
why does my kenwood TH-K2 fm transceiver will not transmit I can not get it to transmit it tells me TX INH on the screen but want transmitt Users Manual (download if you don't have it) TX I NHIBIT You
motorola mt radio beeping beeping and blinking A variety of issues could cause this problem including but not limited to: being shut off from a system it was previously associated with (inhibited), ...
Question about Motorola Radio Communications
mt mag one bpr40 uhf 450/470 will receive but will not transmit. green light is on all the time It probably has "busy channel inhibit" turned on in the menus, and the squelch is open, thus making it ...
Kenwood ts-450s - cannot tune and no ptt My Kenwood TS-450s gives a cw error code of "CHEC" when my AT-TUNE button is pressed. The atu won't activate and nothing happens when I depress my PTT. Fault ...
radio will not transmitt In the software, there is a transmit inhibit feature. Also, if you try to program some frequencies outside what the radio is allowed to do, they will receive only. This is a ...
What does TOT mean on display? How do I get rid of TOT on the display? TOT Penalty means: If the radio transmits more than a set time, it will beep an T-O-T error tone and the radio will only receive ...
Cannot hear transmisions all the time. changed batteries to regular alkaline from pack to see if the battery were bad. this did not change the transmissions problem. need help. You may have one of the
...- 148 MHz but can receive from 136 to 174.The TX restriction is done with a resistor (R119) which inhibits transmission outside of the 144-148 band. It is located very near a large IC ...
vertex 2200 transmits but makes no sound You mean NO Audio Transmit? If there is No Audio at PTT Bad MIc Cord. Change the Mic cord. Very likely transmit inhibit enabled. The red PTT light goes on, but
26 questions posted
Usually answered in minutes!
44 Questions
18 Questions
11 Questions