...paper wrapped around the fuser roller but the error persisted. The only thing that cleared the error was to replace the fuser. I am not sure why but the fuser was shot after it had the paper wrap ...
paper wrapped around fuser When try to print the paper gets jammed and I get a message "Paper Wrapped around fuser". How do I fix? It prints but always gets jammed halfway through and gives ...
paper wrapped around inside. We recommend calling for service, but worst case is you try yourself and can't get the paper out then you would just order a new fuser. We can get you the fuser. Just call
Question about Dell Office Equipment & Supplies
...paper wraps around the fuser. Tried new fuser - same problem. Any suggestions? Good old fuser wrap, what a pain. What type of paper are you printing on. Often with full page coverage printing I find ...
Question about Samsung Office Equipment & Supplies
...paper is wrapped around fuser roll Take the fuser out of the printer after it has cooled.Turn the gears on the left side of the fuser, this will cause the rollers to turn and you should be able to ...
Question about Dell Office Equipment & Supplies
...paper wrapped around the fuser roller because normally the printer will shut down if there's not enough heat at the fuser or the lamp is burned out. The fuser is just before the paper exit and has ...
...paper has wrapped around the roller at the back of the printer and I am unable to get it out. Opended the back , front and side. but no luck. If you cant get paper out from inside after removing ...
paper tray. Cannot see anything. it will probably have wrapped itself around one of the fuser rollers. You may be able to see the fuser rollers from the rear of the printer and check to see. to remove
Question about Samsung Office Equipment & Supplies
...paper has wrapped around the rollers - remove and fit back the plate. In case of repeating problem look for damages to pressure roller and the tefflon sleeve. Have the fuser serviced in that case. ...
...wrapped around the fuser. It WAS glossy Laser paper and NOT glossy Inkjet paper wasn't it ?? Glossy Inkjet paper could cause a proplem like this, as inkjet paper just isnt made to stand the ...
118 questions posted
Usually answered in minutes!
1,017 Questions
951 Questions
482 Questions
475 Questions
417 Questions