Motorola HT1000, MTS2000, MTX8000/9000 Compatible 2 Way Radio Battery Eliminator "radio cloning" Questions

...radio. Cloning only transfers the user's settings from the master radio to the slave. Things like tuning values, serial number, etc. are not changed. To clone a master radio to a slave (target), ...

...Radio Cloning duplicates the contents of your radio (master radio) into the new radio (slave radio). Tuning and alignment information are not affected by cloning. Set Up the Master Radio 1. Turn off ...

...radio B. 2. Connect the cloning cable (NKN6376A) to the Universal Connector of both radio A and radio B. 3. Place the PL switch on radio A to the carrier squelch position for full cloning, or the PL ...

...cloning as per instruction, but the slave radio did not clone and is making this low continual tone from ch 2 above. Durining the cloninig process it wasn't orange but red. Can you help? Even with a ...

...radio to be cloned must have the cloning feature activated in the RSS. Best regards. It's true. First the clon feature must be enabled in the RSS. By default, it is turned off. I'll look in our ...

Icom ic fr5000 clone NG whats is solution for this? Clone means that you are copying radio program from one radio to another of the exact same radio. For some reason the other radio did not take the ...

Radio Cloning Cable, or two drop-in chargers, or the multi-unit charge tray. Instructions for cloning are on page 51 of the user guide: http://www.weatherconnection.com/manuals/RDV5100.pdfBest regards

vertex 180 cloning I just bought some new vertex 180u radios and a cloning cable. I just do not know how to make it go to the clone mode. (yes I have my old 180 that I will use to clone the new radios

...Radio Cloning Cable or the Multi-Unit Charger accessories. (Both sold separately.) You should be able to purchase any of this software/equipment from your retailer where you purchased the radio. Best ...

Cloning What are the instructions for cloning the two-way radios using a cloning cable? The methods differ by model. Contact your local Kenwood dealer to see if they can recommend the appropriate ...