...Output Tray will open automatically. If the Paper Output Tray does not open after several seconds, press the Open button to open the tray manually. Open the Inner Cover. The serial number is attached ...
...open the Output Tray Extension. (1) Put your finger in the rounded indent of the Paper Output Tray and open it gently. (2) Open the Output Tray Extension. 3 Press the Paper Feed Switch to select the ...
Question about Canon PIXMA Office Equipment & Supplies
...Open the output tray extension. Open the paper output tray.and extend the paper output support. Be sure to open the paper output tray when printing. If not open, the machine cannot start printing. ...
Question about Canon PIXMA Office Equipment & Supplies
open the paper output cover by rotating it down towards the output tray. The ink cartridge carrier should move to the ink replacement position on the right side of the printer. Push the cartridge lock
Question about Canon PIXMA Office Equipment & Supplies
...open the Paper Output Tray gently. Lift the Scanning Unit Cover, then hold it open with the Scanning Unit Support. The FINE Cartridge Holder moves to the replacement position. If you want to change ...
...output tray is closed, and it is not. I have tried opening and closing it over and over, turning it off and on, and leaving it unplugged overnight. Nothing has worked. Does this sound like a software ...
...output tray but can't see any paper jam give this a try Turn off the printer. Remove any paper trays. Inspect them for wrinkled or damaged paper. Also open the back cover of the printer if this model ...
...open the Output Tray Extension. 3. Print the print head alignment pattern. - Press the Menu button. - Select Maintenance, and press the OK button. - Select Print head alignment, and press the OK ...
...Open the Paper Output Tray. Look in the print area for an obstruction (such as a paper clip, staple, tape, etc.) and then remove it. If you are printing from an application software, follow the ...
...output tray or the door to the output tray is closed. This is the tray where the paper comes out after printing. Try closing and opening the tray. A sensor could be stuck. Here is the link to the ...
238 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions