Gateway MC7321u Notebook "dc adapter" Questions

DC jack, first check your power adapter with a volt meter if you have one accessible. If your power adapter is outputting the proper voltage, then within a 95% certainty its your dc jack. You can look

...adapter itself or the DC port. 4. Try to use another AC adapter if possible, make sure that that AC adapter is working fine. If the laptop is still not turning on, the problem is with the DC port ...

...DC Voltage.The AC adapter (Charger) converts your household, or business, electricity from AC to DC. (19 Volts DC. In comparison two D cell flashlight batteries store 3 Volts DC ]Regards,joecoolvette ...

...adapter itself or the DC port. 4. Try to use another AC adapter if possible, make sure that that AC adapter is working fine. If the laptop is still not turning on, the problem is with the DC port ...

...adapter or the laptop. 3. Make sure the DC jack is not loose or broken. A loose DC jack will need to be re-soldered. A broken one will need to be replaced. 4. If you have another processor which is ...

dc adapter and also remove battery.#2. Press the power button and hold it down for 15-50 seconds. This will drain the board of any residual charge that may interfere with it powering up.#3. Leave

...DC Jack..(the port where your AC Adapter Plugs into) then typically No, THey are cheap enough that it is best to replace with new.... Yes they can be repaired, but chances are they won't hold up to ...

...DC Jack Adapter is Broken About 2 weeks ago, I noticed that the power cord was loose when I plugged it in to the DC jack at the back of my laptop. I would leave it plugged in at night, and wake up ...

...adapter's DC plug that connects into the laptop power socket with a multi-meter, the voltage should be slightly higher than the voltage that is printed on the label on the bottom of the adapter. If ...

...dc until the battery is completely empty. Do I need a new battery or power cord. Sounds like you need a new power adapter.The M675 needs the correct voltage constantly to work correctly.I'm using one ...