...menu button one time to get to the Freq setting, change it to 6. Then press the menu button to lock in this setting. The next menu screen is the Code, set it to match your other units. Then press the ...
Menu button, then scroll with Up and Down buttons until you find the setting you need. Press Menu Button again and cursor will move down to the settings. Use Up/Down buttons to adjust the settings and
MENU button once. Now, using the + or - buttons choose the frequency number. 3) Press the MENU button to lock in your frequency. This will take you to your CODE. Press the + or - button to choose your
Question about Motorola Radio Communications
...menu button and hold until the code starts to flash. However, when I press and hold the menu button, all it does is turn on or off the channel lock. Any help would be appreciated. Holding in the MENU ...
...Menu" button for several seconds until an icon appears on the screen. "On/Off" begins to flash on the screen. Step 3 Press the "Minus" button to turn the "Roger" beep off. If you want to turn it back ...
motorola t4500 menu menu button wont go into scan mode You program button for scan, then you can go at scan by pushing the button.
Question about Motorola Radio Communications
...menu button until you get to the lock indicator. It will have a Y for yes. using your + or - button change this to an N for no. then proceed with pressing the menu button. Continue using the menu ...
Question about Radio Communications
...MENU button one time, this will take you to your FREQ. After selecting your FREQ 3) Press the MENU button again, select your CODE, press the menu button again 4) You will begin to walk through the ...
Question about Motorola Radio Communications
...Menu button doesn't work I can't get the menu button to work. No matter how long I hold it down, the menu won't lock, flash the channel numbers or anything. I am stuck on channel 1-1. I think you ...
Question about Motorola Radio Communications
...menu button down and then select 0 for the interference eliminator code. Problem is, I can't get to 0. Are the channels and the interference code the same thing? If different, I can't get to the ...
22 questions posted
Usually answered in minutes!
165 Questions
90 Questions
92 Questions
70 Questions