Sharp AQUOS LC-40C32U 32 in. LCD TV "reset tv picture remote" Questions

...tv I called comcast and they reset something and it was somewhat normal but has gone back to not being able to see the full picture. Part of the picture is cut off on all 4 sides. On some remotes ...

...tv menu,right at bat u in the Picture mode go down the menu to reset push it.The Tuner board will reset it self.It will be set on the Dynantic fixed mode.And the AV mode button on the remote should ...

...reset. if that doesn't help try Power on the television. The Sony TV has to be on to start the operation. Press and hold the up arrow on the remote. Make sure that the remote is facing the television ...

...tv on now,have a picture flicker few sec.than died.Have sound left only?Yes,than the 2 long LCD inverter boards are dead.These 2 long LCD inverter boards help the LCD screen to have a backlight to ...

...all the input is the cause to this problem. you can try to reset the tv by disconecting it from the power outlet, then press the power button on tv (not on the remote) and hold it down for 30 ...

...reset button on the back of the TV, it should be below your Cable In port. This will do a cold system reboot and restore your TV back to factory setting. This should restore the View Mode

...tv line cord for 4 hours. That will reset everything internally to factory defaults. TWO: Give it the old whacking test. Just bang on the cabinet in many places with your hand or fist. That will ...

tv Next try a remote reset: You have to unplug the television after turning it off. Take the batteries out of the remote control. Point the remote toward the remote sensor (bottom right hand corner of

...TV is ON, press the small RESET button. It should be right below your INPUT 3 port After the TV is done resetting, then try the "VIEW MODE" button on the remote. Try the different options to see if ...

...tv remote press the menu button and scroll over to setup. Scroll down to reset and press enter. Select yes then press enter. Select yes again then press enter. Then after the tv restarts go back to ...