...dish remote (red dot button - stores setting) 5. At this point you should see a number 1 in front of the primary remote address on the dish system info page Ensure you enter the corresponding IR code ...
Question about Element Electronics Televison & Video
...dish remote 4. then press the 'record' button (red dot button - stores setting) 5. At this point you should see a number 1 in front of the primary remote address on the dish system info page Ensure ...
Question about Sanyo Televison & Video
dish-network-my-dish-remote-needs-progra... My Dish remote needs programming for Sanyo TV, Model DP226649. My Dish ... Needcode. Alta asked this ... Dish Network • 16808 answers • 95% helpful. Code is
...Dish Network and remote #1 and 2...the TV for Remote #2 has now changed but the remote will not work...I replaced it with an Olevia Flat Screen (used one) 32in LCDHDTV Model 432-S12 but cannot access ...
...Dish website. It give directions on setting the code up and has links to the code lists for the different remote types they have. codes do not work 720 everyones already been to the dish site, thats ...
Question about Element Electronics Televison & Video
Dish Network remote will not turn the set on or off and will not adjust the sound level. Dish tells the they do not have the code For Element TV's and I will have to use 2 remotes. Can you solve this ...
Question about iLO Televison & Video
...Dish network remote will only change channel and volume and will not operate "input" or "tv/video" modes. Have you tried running through the channels until they wrap around and start over again? Alot ...
...an unused UHF channel number that your set does have in its up/down list. Match Air/Cable setting of Dish and TV. The Dish output is analog (NTSC) although the tuner(s) only accept digital (ATSC). ...
...DISH network it is format on the remote. You may want to check if that setting is set to zoom or a setting like that. If it is, the TV control of the picture won't change anything. Email me back with ...
...DISH menu screen for this setting is Menu-6-1-5. With dual-tuner receivers, typically "TV 1 Out" is the TV that is connected in the same room as the receiver is located. "TV 2 Out" is the ...
45 questions posted
Usually answered in minutes!
194 Questions
156 Questions
51 Questions
56 Questions
53 Questions