Dynex DX-LCD19-09 19 in. LCD TV "put new batteries remote red" Questions

...PUT BATTERIES IN THE REMOTE AND IT DIDN'T WORK. GOT MORE NEW BATTERIES AND THAT DOESN'T WORK. GOT A UNIVERSAL REMOTE AND THAT DOESN'T WORK EITHER. NOW WHAT DO I DO??? if it is a universal remote just ...

...put in new batteries tv was on went to change channel and would't work wouldn't turn off with or without remote unplugged it and plugged back in still nothing I think has to do with remote the remote ...

...to power saving mode and to push menu button to set input. However, before can push menu, red light indicator comes on and tv will not accept input from remote. Put new batteries in remote

...Put the batteries back into the remote, being very careful to install them correctly. New batteries should be used if you're not sure about the old ones. Step 5- Try the remote. Special Note: If you ...

...the ariel was in properly put new batteries in the remote took the wires out of the tv and put then back in again Power supply might be bad search ebay by using the model No. might get a used cheap ...

...new on my remote and the red light flashes when I push button but the tv doesn't respond. Is it one of hose remote that needs to be programmed for your TV or original reamote? Testing remote control: ...

put new battery in remote would not work Check the battery contacts in the battery compartment for any rust or dust that prevents proper electrical contact. Clean them well using a abrasive paper, and

...Put the batteries back in the remote, and make sure they are correctly installed. Use new batteries if you're unsure about the old ones. 4. Try the remote. If this doesn't work, check the remote is ...

put in new batteries and still no go not even a red light. what can i replace it with. Thanks Christine One way to determine if the remote is sending a signal is to set your cell phone on Camera Mode.