Philips Magnavox 26MD357B-37 26 in. LCD TV/DVD Combo "put monitor together" Questions

...screws on the back of the monitor (there will be about 20). Pull the back off, set it aside and then remove the power supply board. Pop the new one in and put it back together and you are good to

...the back of the monitor. There will be around 12 screws holding it on. Remove it carefully as there are always control boards attached in the molding. Locate the bulb, replace and put back

...0162 0150, 3655 0072 0150, 3655 0112 0150 and my tv took 3655 0152 0150 and take me 25min put back together after take tv back off and confirm part # on main board. Your monitor cable isn't

...monitor but for it to be program i need the remote control wher do i get anothere remote You can still fix that remote, take off the batteries, open the back of your remote control, lift the circuit ...

...and put it back together then use a cleaner and a non-abrasive rag for your screen That got rid of those nasty dust bunnies and i am still using that tv as my monitor . ( I hope that helps you out

...a LCD screen. Then put it back together. Unless its under warranty. Vizios is one year, Short answer, live with it, or buy a new TV. Now days its cheaper to replace than fix most things. go figure ...

...put the monitor back together. VOILA!!! It works perfectly! Thanks to all of you who took the time to post this. if it's bad caps you likely won't even need a schematic to locate them.... visually ...

...put it back together.Tries it out,now it should work.Not,than the remote CPU is shorted and dead.Try website like Remotes.com to buy an exact original remote or very close compatible one. Testing ...

...monitor (I believe it is made by Sceptre). When turned on, the blue LED light in the front comes on for two seconds, and then turns off. After doing some reading, I have come to the conclusion that ...

...put DVD/AV IN switch of second monitor to DVD and the DVD/AV IN switch of the first monitor to AV IN. Now you can watch the movie played on the second monitor on both monitors. I have the manual of ...