Cfm Daikin R410a Split System Air Conditioner "aircon reset" Questions

...aircon was working but stop working for sum reason and the screen display does not come on and seems like no power at all in unit? Have you tried pushing the reset button on the power plug? If the ...

...on dose not want to do nothing. Not even indoor fans comes on what is mins. Is. R 22 aircon. Thanks until the error is taken off. or reset wont do nothing. usually is a sensor. or a board. check ...

aircon automatic with cold air , turn switch to hot on full after few minutes it will blow hot air.. Then turn off and change to car heater setting and you will find the heater is hot again... It must

reset button and doesnt help if the aircon is running to heater and the temprature outside is really cold [ sorry do not know the exact temp] the evaperator at the back will ice up and stop the aircon

...aircon isn't working. we switch on with the remote and the red light is on to indicate it's in operation. the timer light which is green is flashing with very little air comming out therefore we feel ...

aircon it turned itself off after a few hours, then last night it turned itself off and then came back on after about half an hour, this morning when we got up there was water all over the carpet (2nd

...sure the batteries in the remote are good. Reset the aircon and the remote and try again. If not working, need to be fixed. There may be a switch around the outdoor unit of the aircond for switch

...aircon unit does not respond to the remote control. what do i do to fix this? Is there something to do to reset the remote control and re-program ? Or shall i buy a new one i have general electronic ...

...aircon wasn't produce cool air? You have to try resetting the system. First turn the breaker off for the condenser and wait about 20 seconds. After you turn it back on the system should reset. Check ...

...reset pre-def red light blinking on teco aircon unit You have to try resetting the system. First turn the breaker off for the condenser and wait about 20 seconds. After you turn it back on the system ...