...Set Scan mode I have a HT 1000 with no info on use. Need to set scan mode. First, your radio must have one of the side buttons programmed to be scan on/off. You will need to experiment while one or ...
Question about Motorola Radio Communications
set channels to scan on motorola ht 1000 what is sequence to programming ht 1000 On the HT1000, there is an A, B, C toggle switch just under the On/OFF/Volume control knob. When set to A, the radio is
What is scan mode Scan mode is when you set your radio to scroll through all available channels looking for activity.
...set a channel to scan I have a MTS2000 used on a trunked system. When the unit is in scan mode 4 of the 16 channels scan. I need to add another channel to the scan mode. Can you help? P.S. On the ...
...set to interference code zero, place your radios one at a time in scan mode, while you transmit/talk on one individual radio. See if any of the radios receive. Do this with each radio individually to ...
...set to the same channel. To choose a channel: Press the channel/scan up or down key to increase or decrease the channel number displayed. Channel Scan Feature Your GMR325-2 radio has a channel Scan ...
...set a channel on one. I follow the steps in the manual and it will stop for a few seconds and then run thru the numbers. Your radio is in scan mode. Check to see your scan button is not stuck down in ...
...not set just continue to scan. Your radio is in scan mode. You can shut off scan by referring to page 8 in the user guide ...
...channels to a uniden UH0 88 UHF if i have the frequencies. Go to Page 10 of your owners manual the section marked "open scan mode allows you to set which channels are in the open scan memory. Pat ...
set mode. Push the top button again several times until "C" appears. Push "Scan/Tag" to toggle the CTCSS tone frequency/DTCS code setting modes. Push "CH Up" or "CH Down" to set the desired CTCSS/DTCS
174 questions posted
Usually answered in minutes!
90 Questions
92 Questions
70 Questions
63 Questions
