...standby light just flashes. No video. Since i am an electronics tech, i checked the power board and it didnt have any exploded capacitors, and the fuse was good. So what would most likely be the next ...
standby light blinks 4 times Hi, The Standby/Power light of the TV blinks when there is any internal malfunction in the TV. The self-diagnostic function of the projection TV will cause the STANDBY ...
Question about Sony BRAVIA Televison & Video
...Standby light flashing 13 times BRAND NEW TV. JUST TOOK IT OUT OF THE BOX. PLUGGED IT IN AND TURNED IT ON. THE GREEN POWER LIGHT CAME ON FOR 2 SECONDS AND THEN SWITCHED TO RED FLASHING STANDBY LIGHT. ...
Question about Sony BRAVIA Televison & Video
...standby light blinks 4 times picture suddenly changed to white on bottom and black on top with gradiations of gray in between. After a second it turned black & the standby light began blinking: 4 ...
Question about Sony BRAVIA Televison & Video
STANDBY light flashes 9 times My Sony BRAVIA KDL-40XBR3 turns itself off within 5 seconds after I turn it on. The red STANDBY light flashes 9 times after it turns off. How can I fix this? sony 52 inch
Question about Sony BRAVIA Televison & Video
...Standby Light No Power Went to turn on TV only have sound of click from inside of the set and a red flashing standby light..............screen is blank The red light should be blinking a code. For ...
Question about Sony BRAVIA Televison & Video
...standby light blinks 13 times after being switched on. The lower part of the screen briefly lights up then the unit standby light starts flashing These blinks [flashes] are fault indication (Error ...
Question about Sony BRAVIA Televison & Video
...I turn it on it, turns off about 3 seconds later. Plus, the red standby light flashes 13 times, pauses and then goes again. Seek professional serv technician. No listing for 13 fashes only up to
Question about Sony BRAVIA Televison & Video
...standby light and blinks 3 times. Wont switch on after i press standby button. Shutdown with a 3x blink pattern occurs if the 12v from the power supply (GF1 or GF2 depending on model) is lost at ...
102 questions posted
Usually answered in minutes!
541 Questions
531 Questions
381 Questions
277 Questions
252 Questions