Sony Bravia KDL-32V4000 32 in. LCD TV "led tv 6 blink" Questions

...LED blinks 6 times I have Sony TV KDL-52w4100 and do not use it much. The other day I turn it on, it turn right off with 6 blinks on the red LED. I replaced the main P/S and issue remains the same. ...

...led flashes 6 times but doesn't turn on bravia klv-32s550a blinking 6 times but doesn't turn on These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time ...

...LED blink error on my Sony KDL-46CX520 TV? Already changed the Power Supply board without success. Hello, It began like this. We were watching TV, paused the show to have lunch. Back in front the TV, ...

TV XBR9 won't turn on and shows 6 blinking lights on the led indicatior. What circuit board should I replace first? These blinks [flashes] are fault indication (Error Codes). From the number of blinks

...TV Red Light always blinks 6 times. I was mistaken when I said 2-3X originally. These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you ...

...TV worked for about an hour, and then died again. Same 'standby' 6 blinking light error code appears. Granted, this inverter board may also be bad, but based on that screenshot, could something else ...

...tv turns off and the led on the front of the tv blinks red 6 times. This happens over and over. Please assist. 6 blinks indicates broblem with florecent backlighting. Check and tighten screws on the ...

...tv turns on briefly(displays menu) then shuts down, and standby led flashes 6 times then pauses then continues, does not respond to the on/off button or the remote 6 times blinking standby light ...

...led is blinking. Try this link for more information Re: tv kdl-55ex620 red light blink 8 times Do a Power Reset. 1. While the TV is off, unplug the power cord of the TV from the electrical outlet. 2. ...

...tv. a Vizio or Samsung or anything but a Sony The only way to solve this problem is to replace the power supply board. It contains the LED driver circuit which fails early due to a design mistake. ...