Samsung SyncMaster 2433BW 24" wide format TFT Screen Monitor "reseat lcd connector" Questions

...LCD panel - try to dismantle the monitor and reseat the connectors. If nothing is changed then the buffer circuit itself has failed - the defect is now permanent. Either use it as is or consider it ...

...connector on the LCD panel to see if it will help, but I do not believe it will from what I have seen. See example of bad LCD panel in my albums and in my guides. Basic LCD monitor and TV ...

...LCD screen and reseat all ribbon cables. Make sure they are connecting right. I found a black wire on one ribbon cable that was not seated in the connector correctly. RESEAT ALL CONNECTORS carefully ...

...LCD panel!!! Do this with the POWER OFF to both PC and LCD monitor!!! Also check to see if any of the pins in the monitor to pc plug are bent or pushed down into the connector body. 12fixlouie on ...

connector on the T-CON board first, but maore likely that you have failing LCD panel, and it will get worst with more lines. http://s807.photobucket.com/albums/yy352/budm/LCD%20panel/ http://www.fixya

...LCD panel, not hing youi can do to fix, new panel will be needed, not worth fixing. You can try reseating the T-CON connector. http://s807.photobucket.com/home/budm/allalbums ...

connector on the back of the LCD panel first, but more likely you have failing LCD panel due to the TFT driving circuits which new panel will be needed. Basic LCD monitor troubleshooting guide: http:/

...lcd monitor.entering powrsave visit http://www.support.dell.com/ reset to factory settings. Take out all the cables from the back of the computer and then open the computer tower and reseat the video ...

...assembly, new panel will be needed), you can try reseating the ribbon connector on the LCD panel first. This what T-CON board looks like:

...The only thing you can do is to take it apart and reseat the connectors to the lcd panel. If it's the same then the fault is in the panel itself and this is unfixable. Either use it as is or junk