my back speakers wont produce any sound Hi, I installed a kenwood kac-8403 4 channel amp in my car yesterday, with the back speakers on channel B and the front speakers on channel A. For some reason I
maytag dryer drum not turning - suspect belt - don't know how to get to it. take the back off the dryer, take the back support rod loose, that's the thing that hold the back of the drum up. Then slide
amp will not come back on we moved the ground wire for the stereo, and now the amp will not come back on. What could be the problem? We used a test light on the remote wire and other wires and we are ...
my concept amp just stoped workin just now i took off the back panel but evrythin looks ok what might it be????? remove the back panel and look at the other side of the board, thats where u might see ...
the remote starter cable came off, how do you put it back in? loosen off the remote wire screw, you may need to strip some of the wire insulation back, place bare copper wire under screw and tighten ...
...a buddy said it works hes got better ones thats why i got it. its made my premier is the sub name back says pioneer and i dont have the connecting piece for the system control and Ch "A" and "B"
...car amp and dont know where the wires belong red wires go to ur battery and speaker wires go from back of amp to back of sub and there should be a cable that goes from the head unit to the back of ...
Question about Legacy Car Audio & Video
...on need to know how to fix. When I pull the fuses out the power comes in but when I put the fuse back in the protection light comes back on From the description your audio output transistors or
...using the manufacturers specified method. Usually this is just power down briefly and then back up. I usually pull the amp fuse and make sure all LED's on the amp go out. Wait 10 seconds,
6 questions posted
Usually answered in minutes!
6 Questions
20 Questions
19 Questions
15 Questions
11 Questions
