MTX Thunder Elite 801D Car Amp "stereo flashes protect" Questions

stereo and it will "Protect" keeps flashing on my stereo and it will not perform any other function. You might have a speaker wire crossed....Pull radio out but leave hooked up if possible..

...protect light or the power light comes on. is there something special you have to do to get this to work Providing you also ran a ground direct from battery, you need a trigger wire from stereo i ...

...stereo input signal from the amp. If the amp does not do it with the wires unplugged, you may have a problem with the radio sending too much voltage to the input of your amp causing it to go into ...

...stereo and turn the volume up even just a tiny bit I hear a few beeps the geen light flashes goes to a pinkish red color then back to green then shuts itself off. What do I do to fix this? If the ...

...light would flash on and off, but only once the volume went over like 10(which is pretty low on my stereo). All I know about car audio has been what I've learned installing all of this, but it seems ...

Orion XTR Pro 1000 amp ticking My amp was working fine, then the last time i started my truck , the stereo was already on ( I don't/didn't get that "pop" in the speakers that sometimes comes with ...

...stereo is on. The RCA inputs are also getting voltage according to my multimeter. The fuses on the amp are good. Anyone have any idea what is going on? The manual for the amp does not even have a ...