...bottom for a knock out similar to ones on each side ..most of those dryers are stackable and vent out either side my dryeer is in a laundry closet. My old dryer has a flat back the new ones come out ...
Question about Whirlpool Dryers
...bottom vent? I want to have my dryer as close to the wall as possible and not have wasted space between the wall and the dryer. The vent must remain the same diameter all the way out. Previously ...
...bottom you will see the main discharge, take it off and insert a 45 degree elbow, you will need to then install hard venting to reach the knock out on the side. Be sure to use metal duct tape when ...
...vent out the bottom. The shop replaced the original internal rigid vent pipe with aluminum foil flex. I want to change it to vent out the back using a rigid vent pipe from the internal blower to the ...
...bottom center on dryer) on my Amana dryer aligns perfectly with the wall connections in my apartment; however, due to the alcove, I have difficulty accessing these for installation. What is the best ...
vent option Helpful! "Optional exhaust installations This dryer can be converted to exhaust out the right side, left side, or through the bottom. Contact your local dealer to have the dryer converted.
...install new glides on. How do I do it? I have the new glides already. Hi thanks for the question Remove 2 screws from the bottom front1each side pull front towards you set to side taking care ouu the ...
Question about Dryers
...vent internally to go to the back of the dryer. http://parts.sears.com/partsdirect/part-model/Maytag-Parts/Dryer-Parts/Model-MDG6800AWW/3048/0151200/W0703640/00001 It's piece number 17. You have to ...
...vent pipe and start the dryer again. Feel all around the bottom to see if any air is blowing out from under the bottom. This would indicate there is a break or gap in the dryer's internal ducting. If ...
104 questions posted
Usually answered in minutes!
1,329 Questions
1,410 Questions
750 Questions
524 Questions
182 Questions