Kenmore 700 6972 Dryer "timer runs backwards" Questions

Ad

Question about Kenmore Dryers

1 Answer

Timer runs backwards I need to see if I need to replace the timer. Timer sometimes runs backwards. I will set in in automatic cycle and it runs counterclockwise. Sometimes it does work but at times it

Ad

...Timer runs backwards only sometimes. Sears model C1108470290 electric clothes dryer works fine, but has one small quirk. Every once in a while, the timer will run backwards after it has been set, and ...

Ad

Question about Dryers

1 Answer

timer runs backward on auto and timed a timer that runs backward needs to be replaced

Turned timer dial counter clockwise and now dryer will not start. However when on a cycle it sounds like a timer is running. When the timer dial is turned to off position or door is opened it stops. ...

...timer started going backwards. The repairman was just here and said there was nothing to be done. He watched it go from 10 min to 55 min after running on 10 min for a long time. How can I trust the ...

Question about Dryers

1 Answer

...BACKWARDS THROUGH THE HEAT CIRCUIT AND CHECK EACH COMPONENT IN THAT CIRCUIT. IF ONE OF THEM HAS 240 VOLTS PRESENT, THAT IS THE BAD COMPONENT. POSSIBILITIES ARE, HIGH LIMIT THERMOSTAT, CYCLING ...

...runs drum turns had breaker and wiring going into dryer everything ok still no heat could wires be backwards going to replacement parts? put in new timer switch,new thermal fuse,new heating ...

Question about Whirlpool Dryers

1 Answer

Timer runs but no other noise. make sure door is closed and then if that doesnt do it, open door and look for where the door contacts at closing you will see a little metal table that is like a ground

Question about Dryers

1 Answer

...runs ALWAYS UNPLUG YOUR DRYER BEFORE STARTING ANY REPAIRS Your problem sounds like drum rollers have flat spots on them or in need of lubrication, or maybe your drum belt has slipped off of the idler ...

Question about Whirlpool Dryers

1 Answer

timer switch, start switch, etc. from the top of the dryer. Note: Some tops hinge and tilt backwards so they do not have to be removed. Also remove the screws holding the lint filter in place. Be REAL

Not finding what you are looking for?
Kenmore 700 6972 Dryer Logo

141 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...