Kenmore Elite HE3 Steam 8674 Dryer "screws attach cord" Questions

...cord to accommodate the plug that is in the new apartment. Is this possible? I removed the 3 prong plug from the back of the machine. On the machine side there is now 3 screws with wires attached. ...

...right screws, attach just like cord 3 wires, left on left, center on center, right on right. The only thing different with a 4 prone is you have a ground wire which grounds to ground screw on

...cord has white, black, and red wires. Do I need to attach the black wire to the terminal with the black and yellow wires, and attach the red wire to the terminal with two blue wires? should I attach ...

attach to the dryer body so the machine can be grounded by the ground wire. 1 Unplug the dryer and move it to an accessible spot. Unscrew the plate on the back that covers the electrical terminal with

attach the two outside wires from the cord to the left and right screws on the terminal block. Connect the center wire of the cord to the center screw of the terminal block. The only important wire is

attach to the dryer body so the machine can be grounded by the ground wire. 1 Unplug the dryer and move it to an accessible spot. Unscrew the plate on the back that covers the electrical terminal with

...screws/bolts. Your 4 wire cord has the black wire going to one of those screw/bolts. That is a HOT connection. Your cord also has a red wire attached to a screw/bolt. It too is HOT. These two hot ...

...screws, do not fully tighten until electrical connections are complete. ? Attach the power cord ground conductor (green wire) to the ground terminal marked with the ground symbol. Tighten screw until ...

...screws and the cord should pull out easily. Then thread the new cord through the fitting and reverse the process. Just remember to thread the cord through BEFORE you connect the wires so that you ...

...attach the white wire on the cord to the the middle panel ( which is where the green ground is connected) and the red wire on the cord to the first panel where the red wire is and the black wire on ...